2019 CUBE AGREE C:62 Race Disc Ultegra

Thoroughbred racing machine!

Turn up to a race or a training ride with the CUBE Agree C:62 Race Disc and it's fair to say that you've run out of excuses... but you've also got a thoroughbred racing machine on your side. With a full Newmen cockpit setup, Shimano's extraordinary Ultegra gears and hydraulic disc brakes and a light, stiff and strong Newmen Evolution SL R.32 wheelset, this is an endurance machine that will bring out the best in every rider. Whether it's tough climbs - where its low weight and exceptional drivetrain efficiency come to the fore - or long, fast descents - where the fade-free power of the hydraulic disc brakes and agile geometry work together to ensure you're always in full control - you're onto a winner. And all served up with the comfort you need to reduce fatigue, mile after mile. This cutting edge carbon frame is equipped to perform. All that's missing is you. 

You know the saying: power is nothing without control. When CUBE set out to design the chassis for the Agree C:62 Race Disc, they knew they had to achieve both exceptional drivetrain efficiency and unsurpassed comfort. Mutually incompatible goals? Not for CUBE's engineers. A tapered head tube, oversized down tube and PressFit bottom bracket shell work with 12 mm axles to delivery razor-sharp handling and incredible drivetrain efficiency, with strength to spare to handle the extra loads from hydraulic disc brakes. Meanwhile, slender stays and carbon fork blades are specially designed to help reduce rider fatigue on even the roughest road surfaces. Internally routed cables, Di2 compatibility and an integrated seat clamp add the finishing touches that emphasize this bike's thoroughbred potential. 

• C:62 Carbon Fiber Technology - Frames that bear the C:62 logo, feature highly innovative developments from CUBE's HPC technology. Through ongoing optimization of the Advanced Twin Mold manufacturing process in which the overlaps of the layups were reduced, along with the development of carbon fiber technology, they created an extremely rigid lightweight frame with a 62% fiber content.
• Advanced Twin Mold - This technique uses a complete core to provide the perfect frame form during the lay-up process. As with the Twin Mold technology, precise inserts are used to ensure extra strength at high-stress frame points. This combination offers maximum control over fibre orientations during the lay-up and production process. The Advanced Twin Mold high-tech carbon manufacturing process translates to outstanding product safety and quality together with optimum weight and stiffness characteristics.
• Integrated Cable Routing - Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.
• Adaptable X12 Hanger - CUBE optimized their new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. CUBE can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.
• Press Fit BB - With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows them to build a wider down tube and more broadly-spaced chainstays. Every millimeter of additional width gives a significant improvement in lateral stiffness.
• Wet Paint Surface - On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. CUBE use this surface treatment technology mainly to save weight.

Fact Sheet of CUBE AGREE C:62 Race Disc Ultegra